B&K 50 Series II Manuel d'utilisateur télécharger pdf (Page 76)

1 A

3 V

0.5 W

2 Ω

3.8 A

0.5 A

2.8 V

Refer to section “Save/Recall Instrument Settings” in section “3.3 SYSTEM Menu” for details on

saving settings into internal memory.

Note: If the program requires more than 10 sequences, each program can be linked

(chained) to another program after it has completed.

1. Setup the program parameters. From the front panel press and then to access

the PROGRAM menu. It will look like the display below:

2. Select Edit and press . The first parameter to configure is the Active Sequence.

This allows activating or deactivating a sequence in the program. Sequences that are

activated will be part of the test program. Deactivated sequences will be skipped. To

activate a sequence, press the number corresponding to the sequence using the

numeric keypad. For example, if sequence 1 through 5 are to be activated, press

. The activated sequence numbers on the display will change to Y,

EDIT PROGRAM

Active Sequence = 0987654321

PROGRAM

Run Recall Edit

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 101 102

Pas de commentaire

B&K 50 Series II Manuel d'utilisateur Page 76