B&K Reference 20 Plus A/V System Controller Manuel d'utilisateur télécharger pdf (Page 5)

VM801P Embedded Video Engine Plus Module Datasheet

Version 1.0

Document Reference No.: FT_001102 Clearance No.: FTDI#426

2 Hardware Description

Figure 2-1 VM801P43A/VM801P50A Module Top and Bottom View

NOTE: The above modules are also available with pearl coloured bezels.

The VM801P module is available for different LCD sizes: 4.3” or 5”.

Each VM801P module is assembled with the following parts:

 HW_362_VM801P PCB board

 LCD panel with capacitive touch screen

 Bezel

The main functions of the VM801PxxA module are as follows:

 FT801 EVE for graphic, audio and capacitive touch control

 ATMEGA328P microcontroller operating at 5V and 16MHz, controlling the FT801 and other

peripheral interfaces

 3 stage audio filter

 8Ω micro speaker to work with on-board audio amplifier

 Jumper selection allowing audio line out option

 LCD backlight LED driver

 Real Time Clock(RTC) with button battery

 USB interface for power supply and firmware programming

 2-pin JST connector for alternative power source

 3.3V regulator: takes 5V input and outputs 3.3V for on-board circuits

 2x Micro-MaTch miniature connectors for various daughter card expansion

 SD Card Socket (4GByte card supplied with module)

1 2 3 4 5 6 7 8 9 10 ... 25 26

Pas de commentaire

B&K Reference 20 Plus A/V System Controller Manuel d'utilisateur Page 5